Designer Series Cornice System/Cornice Design 10
 
 

CORNICE DESIGN No. 10

Designer Series Cornice, Design 10

Nominal Size: Classic: 24” Entablature x 15” Depth
  Contemporary 15” Entablature x 15” Depth

Cornice Design 10 is a very popular profile for use with parapets as well roof eaves. This cornice design uses a large 3” convex moulding with a scrolled 1-1/2” moulding along with a frieze moulding. This cornice design also lends itself well to parapets and roofs where gutters are not required. With some creative use of additional mouldings dentils, flutes, and engravings may be added. See page 56.

Details and photographs shown on this page show this cornice design applied to a parapet. Page 31 shows how this cornice would be applied to a gabled end. The rake edges utilize a simple roman trim with a frieze.

Framing shown is merely a suggestion and you may frame your building eaves in the manner necessary to suit your criteria -- but the location of the fastening points of the gutter and cornice trims must be held.
>>Click here for Gable Details & Framing Dimensions

  1. Shelf Flashing designed to form a fascia wrap.
  2. 3” Concave Moulding, style 4 (modified for soffit mounting), mounted to framing. See page 50 for detailed dimensional information.
  3. LZ-1 Moulding, style 3, attached to framing and mounted onto cornice brackets. See page 52 for detailed dimensional information.
  4. Box Trim Frieze moulding, style A, hooked onto trim boards. Box Trims are located on page 54.
  5. 8” Roman Cornice Moulding mounted on roof surface and hooked onto cornice brackets. Roman Cornice Mouldings are located on page 44.
  6. J-Cover Frieze Moulding installed over wood trims.

  ----------------------------------------------------------
Copyright © 2002 Perimeter Systems,
A Division of Southern Aluminum Finishing Company, Inc.
All rights reserved.