Designer Series Versa Cornice

Utilizing profiles from our Cornice Mouldings, Versa Cornice is a product developed to convert dull parapet copings into a visually exciting sculptured roof edge. Designed for both retrofit and new construction, Versa-Cornice attachment brackets fit all Perimeter Systems’ coping caps and most other parapet caps or conditions.

1. VERSA CORNICE FLASHING AND TRIM; Flashing trim is manufactured from 0.040” aluminum in 10’ lengths. Joint treatment is a concealed splice plate. The flashing trim is hooked into the cornice’s hemmed edge and riveted to the heavy duty mounting brackets. Sealant should be applied to the existing coping edge and the flashing trim.
   
   CORNICE TRIMS; This illustration shows our OCT & ICB cornice profiles. Actually, any combination of trims may be used with the Versa-Cornice application.
2. OCT CORNICE TRIM; Cornice trim is manufactured in 10’ lengths. Joint treatment consist of a 3/8” expansion reveal with a 6” concealed splice plate.
3. ICB CORNICE TRIM; Cornice trim is manufactured in 10’ lengths. Joint treatment consist of a 3/8” expansion reveal with a 6” wide concealed splice plate. Installer should align joints with mating cornice trims.
4. HEAVY DUTY MOUNTING BRACKET; Brackets are manufactured from 1” x .125” aluminum (welded construction), fastened to the parapet with screws through the coping’s vertical face and into wood substrates. A 3/8” hole should be drilled into the coping face at the bracket locations to allow for thermal movement. Use a high grade exterior sealant to seal holes.