ROMAN CORNICE MOULDINGS
- Roman Moulding Profile, Style 1, is designed to align with the Roman Series
Designer gutter system and has a closed top. This profile is used to continue the
“gutter cornice” where no gutter is required.
- Roman Moulding Profile, Style 2, designed for flat or rake roof edges. Its roof deck
flange is fastened with 1-1/2” ring shank nails at 24” centers. Its lower hemmed
edge hooks onto mounting brackets spaced at 24” centers.
- Roman Moulding Profile, Style 3, designed for fascia mounting. Its upper edge is
fastened with 1-1/2” ring shank nails at 24” centers. Its lower hemmed edge hooks
onto mounting brackets spaced at 24” centers.
- Roman Moulding Profile, Style 4, designed for soffit mounting. Its upper edge is
fastened with 1-1/2” ring shank nails at 24” centers. Its lower hemmed edge hooks
onto mounting brackets spaced at 24” centers.
- Roman Moulding Profile, Style 5, designed for soffit mounting. Its upper edge may
be fastened with 1-1/2” ring shank nails at 24” centers or it may be held in position
with mating cornice mouldings such as a J-Cover. Its lower hemmed edge hooks
onto mounting brackets spaced at 24” centers.
- Roman Moulding Profile, Style 6, designed for soffit mounting. Its upper edge is
fastened with 1-1/2” ring shank nails at 24” centers. This moulding comes with a
notched edge to allow concealed fastening and to adjoin cornice members and it’s
lower hemmed edge hooks onto mounting brackets spaced at 24” centers.
|
|
|
