A Proud History

April 13, 2016 — SAF Installs Cut-To-Length Coil Processing

SAF Installs Cut-To-Length Aluminum Coil Processing Line in Redding, CA

Redding, CA – April 13, 2016  – SAF (Southern Aluminum Finishing Co.) recently installed a Cut-To-Length (CTL) aluminum coil processing line in their SAF-West, Redding, CA plant. The heart of the line is a Herr-Voss 6 hi corrective leveler to enhance processing of non-ferrous coil for surface critical sheet with the flatness important for architectural building applications.  Cut-To-Length Aluminum Coil Processing
SAF’s new Cut-To-Length processing line can handle 0.024” – 0.125” thick aluminum coils up to 60” wide, ID 18” – 22” and  100 feet-per-minute.  Newly renovated electronic controls for both the leveler and the flying shear enable more precise and reliable production. An in-line slitting head and flying shear minimize processing time.
The leveler’s rollers give SAF the capability to meet surface critical requirements for painted and anodized aluminum coil processing, not always available from other toll finishing providers specializing in carbon steel or other non-surface critical coils.
The SAF-West CTL coil processing line supports both existing SAF manufacturing and third party toll processing orders from other manufacturers in northern California. It also adds to SAF-West’s 60” Blanking Line production capabilities.
SAF now offers Cut-To-Length aluminum coil processing from SAF-West and SAF-GA facilities. Combined with an expansive aluminum coil, sheet and extrusion inventory, this equipment enables SAF to reduce delivery times nation-wide for blanks and special lengths, while providing customers with improved aluminum sheet flatness and quality.
Download a full resolution image: http://bit.ly/1WsaGFA

Based in Atlanta, Georgia, SAF is a nation-wide aluminum extrusions and sheet distributor, metal fabricator, and aluminum finisher specializing in Kynar painting and architectural anodizing. SAF also distributes column covers, architectural panels, and commercial roofing trim to architectural specifiers, glazing contractors, and other industries. The SAF West serves Western US, Canada, and Pacific Rim markets.

For more information contact:

Penn McClatchey, Co-CEO

SAF Southern Aluminum Finishing Co., Inc.

1581 Huber St NW | Atlanta, GA 30318-3781 USA

Phone: 800-241-7429

Sam Heier, General Manager

SAF West

4356 Caterpillar Road | Redding, CA 96003 530-244-7518 x137